The veneer retains the grain variation of walnut. Individual strips contribute their own surface detail to the repeated layout.
Brown walnut veneer acoustic panels with black MDF slats on a polyester fibre backing. The woodgrain faces and recessed gaps create a textured wall finish for conference room interiors.
| Basic Material | Black MDF |
| Finish | Veneer |
| Pattern | 27-13 |
| Size | 605*605*21 |
Brown Walnut Acoustic Slat Wall Panels For Conference Room
Brown Walnut acoustic panels combine walnut veneer faces, black MDF slats and a polyester fibre backing. The veneer supplies the visible wood surface, with grain variation adding detail to each strip. Its brown appearance gives the treatment area a defined colour character that can sit alongside conference tables, cabinetry and other interior finishes.
The 27mm-wide slats are separated by 13mm gaps, leaving the fibre backing exposed between them. This creates a layered surface: the wood faces sit forward, while the recessed spaces establish the repeated lines. Vertical and horizontal arrangements give the wall different visual directions.
The polyester backing provides the absorbent component of the assembly. It contributes to reflected sound control through the exposed gaps, allowing the wood-finished wall to serve as part of the room’s acoustic treatment. Installed coverage and the construction behind the panel influence the acoustic result.
The veneer retains the grain variation of walnut. Individual strips contribute their own surface detail to the repeated layout.
The brown appearance brings colour into the wall composition. Grain and tone remain visible between the recessed spaces.
The slats stand forward of the fibre base. Their regular spacing creates a rhythm of wood faces and gaps across the installation.
| Core Material | MDF+Polyester Fiber |
| Finish | Melamine/Veneer/PVC Rich Finish Options |
| Panel Size | L2400mm*W605mm*T21mm/Customized |
| MDF Thickness | 12mm/15mm/18mm |
| PET Thickness | 9mm/12mm |
| Installation Method | Glue, Wood Frame, Gun Nail |
| Function | Sound Absorption/Interior Decoration |
| Color | Refer To Color chart or customized |
| Application | Corridors, Living Rooms, Bedrooms, Restaurants, Hotels, Clubhouse Offices, Lobbies, Room Renovations, Residences, Recording Studios, Studios, Schools, Shopping Malls |
| Fireproof Grade | As requirement, Class A, Class B |
| Noise Reduction Coefficient | NRC 0.6-0.8 |
Installation Structure: Slat Panel+50mm Insulation Foam+100mm Cavity
| Frequency(Hz) | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 | NRC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sound absorption coefficient(a) | 0.18 | 0.32 | 0.75 | 0.92 | 1.02 | 1.06 | 1 | 0.93 | 0.89 | 0.73 | 0.79 | 0.76 | 0.72 | 0.72 | 0.72 | 0.69 | 0.62 | 0.66 | 0.82 |

Ensure that the wall is flat, dry, and clean, free of dust, oil stains, and other impurities. If there are uneven areas, they need to be repaired and leveled to provide a good foundation for subsequent installation.
According to the size of the wooden grille sound - absorbing board, reasonably plan the installation position of the wooden keel. Use a level to ensure that the wooden keel is installed horizontally, with the error controlled within a very small range. Placing sound - absorbing cotton between the keels can further enhance the sound absorption effect. The thickness and density of the sound - absorbing cotton can be selected according to the actual acoustic needs.
Accurately place the wooden slat acoustic panel on the wooden keel and fix it with black screws. The spacing of the screws should be uniform to ensure that the sound - absorbing board is installed firmly. The combination of black screws and the sound - absorbing board can ensure the stability of the installation without affecting the overall aesthetics.
Install the wooden slat acoustic panel in full - scale in order from left to right and from bottom to top. Pay attention to the tight splicing between each sound - absorbing board, with uniform gaps to ensure the overall aesthetics and acoustic effect.
We use cookies to enhance your browsing experience, serve personalised ads or content, and analyse our traffic. By clicking "Accept All", you consent to our use of cookies.
We use cookies to help you navigate efficiently and perform certain functions. You will find detailed information about all cookies under each consent category below.
The cookies that are categorised as "Necessary" are stored on your browser as they are essential for enabling the basic functionalities of the site. Show more
Necessary cookies are required to enable the basic features of this site, such as providing secure log-in or adjusting your consent preferences. These cookies do not store any personally identifiable data.
Functional cookies help perform certain functionalities like sharing the content of the website on social media platforms, collecting feedback, and other third-party features.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics such as the number of visitors, bounce rate, traffic source, etc.
Performance cookies are used to understand and analyse the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Advertisement cookies are used to provide visitors with customised advertisements based on the pages you visited previously and to analyse the effectiveness of the ad campaigns.